Plazmaman Twin Entry Vertical flow Pro Series Intercooler for all Street/race car combinations.
With a Plazmaman Race Spec Intercooler you are guaranteed a perfect product first time round, with no compromise.
- 800-1500+ Hp designs and core capability.
- Lightweight tube & fin race spec core design.
- low pressure drop.
- We have core options for both turbocharged or supercharged combinations.
- Many different core height and width combinations also available.
- Fabricated twin entry bottom and single entry top, outlets of your choice, direction and size.
- We can fabricate and tack weld a design and send to you for test fitting before we full weld the product. This way 100% fitment will be achieved.
- Available in Raw, Black or Polished finish.
Please be advised that the flow rating figures for this intercooler is based on CFM flow figures and experience. These figures might not be correct if a over larger capacity engine (6 Litre +) and/or larger body 90mm + size turbocharger is used. Please contact us if you fall into this category for intercooler requirement.
Extra options (Contact Anthony at Drift Racing Industries for the following modifications/options)
Top Tank Exit: 3 inch / 3.5 inch / 4 inch
Top Tank Exit Style: Towards Firewall / Towards Bonnet / Angled (please contact us with requirements $AUD +40.00)
Inlet and Outlet style: Hose style outlets / Plazmaclamp outlets (Clamps must be purchased separately $AUD +60.00)
Forced Induction style: Turbocharged / Supercharged
|Dimensions||85 × 45 × 25 cm|