The GKTECH Z33 350Z/Z34 370z gearbox cross member has been designed as a bolt on solution when fitting these gearboxes to an S chassis when running either an SR20/KA24 motor.
The gearbox cross member has been designed to use an OEM S13/S14 gearbox mount
- 6mm steel plate, laser cut and press bent
- CAD designed
- 20mm of adjustment to suit modified setups
- Weighs 980grams
NOTE: Fitment is based on running an SR20 or KA24. If you're running an engine that sits further back then the cross member most likely won't work.
Will this shifter suit my setup?We can't confirm every possible configuration but we can confirm that if you are using an adapter plate with an SR20 or KA24 in an S13, S14 or S15 with a Z33 or Z34 gearbox that our crossmember will fit provided the gearbox has been machined down to suit.If you are using a kit that pushes the setup further back and does not require machining, we cannot gaurantee fitment. Which also means if you're running an engine that sits further back then the cross member most likely won't work.
Do you sell adapter plates or other conversion parts?At this point in time we are only making shifters and gearbox crossmembers.Do you sell a gearbox mount to suit this crossmember?We do sell a direct OEM replacement gearbox mount that does fit, however, you will need to shave one side of the mount slightly, both variants can be seen here;Solid - https://au.gktech.com/billet-aluminium-solid-gearbox-mountPolyurethane - https://au.gktech.com/polyurethane-gearbox-mount