Plazmaman's 950hp Lightweight Tube & Fin Intercooler Kit is designed to suit the RB30 Holden VL Commodore.
This intercooler kit is for those who have upgraded turbochargers, and want to run high boost pressures.
This kit utilizes our latest Race Spec tube and fin 600mm x 300mm x 76mm (only 6.8kgs) intercooler core, with a 950hp rating.
Also included is a complete CNC mandrel bent piping system, which allows for greater air flow, and it’s aluminium construction won’t collapse or flex under boost like a factory rubber constructed hose.
This kit was developed to suit street and strip applications using higher boost levels than factory. The kit was designed to fit the factory turbocharger position with the compressor housing outlet facing straight down. If you’re looking at running a specifically unique manifold, or larger turbochargers, please view our VL plenum kits in our other listings. Or, Contact Us for advice before ordering.
***IMPORTANT - You are fitting an intercooler to a car that was not fitted with one from factory. Cutting and drilling of the body WILL BE REQUIRED. If you are concerned with originality and future resale value, don't modify your car. A Single Hole has to be drilled on the drivers side for the top intercooler pipe to pass through and a side hole on the passengers side for the turbo hot pipe to fit - See pictures.***
We can also weld a Blow Off Valve adaptor on the piping to suit the most common sizes on the market, (excludes flange style BOV).
The Intercooler kit is available in raw, polished or stealth black finish.
Silicone hoses are available in blue or black.
***PLEASE NOTE - The intercooler will sit below the bottom of the standard SL, Executive, Berlina and Calais bumpers. HDT, HSV or other aftermarket bumpers may offer more coverage***
SILICONE HOSE COLOUR
600x300x76mm (950hp – Bottom will sit 50-60mm below bar)
600x275x76mm (900hp – 25mm shorter. Still sits below bar, but less noticeable)
|85 × 40 × 20 cm