DESCRIPTION
The GKTECH CA18/SR20 Polyurethane engine mounts are a direct replacement of the standard item and help reduce engine movement and get power to the ground. Particularly useful in a drift car where the car is off and on the throttle although all forms of motorsport will see an improvement in the feel of the car but without the drastic increase in vibrations that the solid mounts see. Our multi piece construction makes these differing to most Polyurethane engine mounts in that these don't just run a bolt all the way through a block of Polyurethane rather the 2 sides are separate and join by the Polyurethane.
- Multi piece construction
- 80ShA Polyurethane
- Replacement part for Nissan part numbers: 1121065f11, 1122085F00, 1122065F01, 1122065F06
- Replacement part for Nismo part numbers: 11210-RS540 and 11220-RS540
- Sold as a PAIR. Ie. the price is for 2pcs (left and right)
Vehicle Compatibility:
- Fits all RWD CA18 and SR20DE/DET's and KA24DE's (RWD ONLY)
NOTE: The OEM heat shield MUST be used.
FAQ'S
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.Do you make these to suit other cars?We only sell the parts listed on our website. If it's not listed on our website, then we don't sell it. Sorry.However, we do make solid engine mounts in which can be seen here: https://au.gktech.com/ca18-sr20-polyurethane-engine-mounts
What's the advantage of using the GKTech polyurethane engine mounts?Our polyurethane engine mounts are a multi piece construction that differs to most Polyurethane engine mounts in that these don't just run a bolt all the way through a block of Polyurethane rather the 2 sides are separate and join by the Polyurethane. Ours offer the perfect balance of rigidity and flex keeping movement to a minimum to get the power to the ground.What modifications are required, is this hard to fit?No modifications are required just simply remove and refit.
Is there anything else needed for installation?No, your OEM hardware can be used as they will arrive as shown in the product photo.Can I install this myself? If so how long will installation take?Yes, as it is relatively straightforward. Installation should take around 20 minutes.What is the height of the engine mounts(excluding studs)?65mm