DESCRIPTION
The HFM.Parts Rear Rotor upgrade kit now allows you to increase your 292mm OEM Rotors to 337mm whilst still retaining your OEM Calipers. Includes rotors, brackets and all bolts required . The rotors included are Slotted and Crossed drilled for better braking and heat disbursement.
Vehicle Compatibility:
- Nissan S13 Silvia (using 2pot rear calipers)
- Nissan S14 200SX (using 2pot rear calipers)
- Nissan S15 200SX (using 2pot rear calipers)
- Nissan Skyline R32 GTS-T
- Nissan Skyline R32 GTR (non Brembo only)
- Nissan Skyline R33 GTS-T
- Nissan Skyline R34 GT-T
- Nissan Z32 300zx TT
NOTE: Requires the use of 17" rims as a minimum in most cases.
NOTE #2: Will not work with aftermarket knuckles.
NOTE #3: When used on Z32 300zx or R34 alloy knuckles a .3mm shim is required to space the caliper correctly (included)
NOTE #4: It is recommended to use these in conjunction with braided brake lines.
FAQ'S
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.Do you make these to suit other cars?We only sell the part listed on our website. If it's not listed on our website, then we don't sell it. Sorry.What's the advantage of using the HFM 337mm rear rotors?These rotors allow you to go from 292mm to 337mm while till keeping your OEM calipers. This aids in better braking, also the rotors are also slotted and cross drilled for better heat distribution and help reduce brade fade.What modifications are required, is this hard to fit?No modifications are required, simply just remove and refit.
Is there anything else needed for installation?No, the rotors will arrive as shown in the product photo, with included hardware.Can I install this myself? If so how long will installation take?Yes, being a simply rotor swap and bracket swap installation should take around 45 minutes. However, being the brake system we recommend only a trained professional to install this product.Will this fit my S-chassis?Yes, if you have a 4 stud rear, then you will need to re-drill the rotors to suit and use 2pot calipers. If you have a 5 stud rear, then it is a straight fit, but you also need to ensure you are using 2pot calipers.This kit will only work with those calipers and not Brembos.